Skip to content

Roofing

Roofing cost overview

Roof prices swing more than almost any other home project, mostly because of what is on the roof, not just its size. Material is the biggest factor: asphalt shingles are the cheapest option, while standing-seam metal, tile, or slate cost far more per square (a roofing square is 100 square feet) but last longer.

1 estimator in this trade.

What drives the price

Roofing materialAsphalt shingles, Metal, Clay or ceramic tile, SlatePrice effect: ×1 to ×1.846
Roof pitchWalkable (up to about 7/12), Steep (steeper than 7/12, needs fall protection)Price effect: ×1 to ×1.375

Price ranges by job

Find and fix a roof leakLow $350Typical $900High $1,970
Replace missing or damaged shinglesLow $150Typical $350High $700
Chimney flashingLow $200Typical $400High $800
Roof valley repairLow $300Typical $700High $1,500
Skylight leakLow $225Typical $500High $800
Roof vent or pipe bootLow $100Typical $250High $550
Ridge cappingLow $250Typical $500High $750
Dormer repairLow $250Typical $700High $1,000
Fascia and soffit repair (one damaged section)Low $300Typical $900High $1,700
Repair a damaged truss in place (sistering or repair plates)Low $300Typical $550High $800
Replace a rotted rafter tailLow $200Typical $300High $400
Eaves repair (per linear ft)Low $6.00/linear ftTypical $13/linear ftHigh $20/linear ft
Replace rotted roof decking (per sq ft)Low $2.00/sq ftTypical $5.00/sq ftHigh $8.00/sq ft
Read more about roofing costs

Pitch matters too: a steep roof takes longer to work on safely and needs more scaffolding or fall protection, which shows up in the labor price. For repairs, the range depends on how localized the damage is, whether it is a leak versus storm or structural damage, and how many layers of old roofing have to come off before new material goes on.

Other factors a phone estimate cannot capture: how many stories the house has, whether the old roof needs a full tear-off or can be layered over (not allowed everywhere), permit costs in your city, and how easy it is for a crew and dumpster to access the property. Get at least three written quotes from licensed, insured roofers before signing anything, and ask each one to itemize materials, labor, tear-off, and disposal separately so you can compare like for like.

The estimator on this page calculates a low/typical/high range from published market data for a roof repair (leak fix, patch, or minor reshingling), split roughly between materials and labor. It does not know your roof's pitch, layer count, or local permit fees, so treat the result as a starting point for comparing contractor quotes, not a bid.

Frequently asked questions

How much does a roof leak repair cost?

In our sourced data a single leak repair runs from $350 to $3,000, with a typical figure of $1,100. The spread comes from how hard the leak is to trace and what is damaged underneath.

What does it cost to replace damaged shingles?

Replacing missing or damaged shingles is sourced at $100 to $700, typically about $350. Costs rise when the damage is spread across several areas of the roof.

Is flashing or valley repair more expensive than shingle repair?

Both are priced per repair. Flashing repair is sourced at $150 to $750 and valley repair at $300 to $1,000, so valleys generally cost more because the water load there is heavier.

What if the roof deck under the shingles is rotten?

Decking repair is priced per square foot, at $2 to $8 with a typical $5. Ask the roofer to inspect the deck and list any replaced sheathing as its own line on the quote.

Can I fix a roof leak myself?

Small, accessible fixes are possible, but working on a pitched roof is a real fall risk and a wrong patch can hide water damage. If the leak source is unclear or the deck is soft, get a written quote from a licensed, insured roofer.