1 estimator in this trade.
Price ranges by job
| Job | Low (per unit) | Typical | High |
|---|---|---|---|
| Chimney sweep and inspection | Low $80 | Typical $250 | High $380 |
| Mortar crack repair / minor tuckpointing | Low $150 | Typical $350 | High $500 |
| Chimney cap repair or new cap | Low $100 | Typical $250 | High $500 |
| Chimney flashing repair or replacement | Low $200 | Typical $300 | High $600 |
| Chimney crown repair or replacement | Low $500 | Typical $1,500 | High $3,000 |
| Chimney relining (flue liner replacement) | Low $1,000 | Typical $2,800 | High $5,000 |
| Partial chimney rebuild (top of the stack) | Low $1,000 | Typical $2,500 | High $4,000 |
Read more about chimney repair costs
Small mortar cracks are tuckpointed, a missing or rusted cap is replaced, and leaks where the chimney meets the roof usually come from the flashing. The crown, the concrete slab on top of the stack, is a bigger job when it is cracked through, and relining the flue or rebuilding the top courses of brick are the most expensive repairs because they need more materials, time and access.
Height, roof pitch and whether a lift or scaffolding is needed all move the labor price, and an older masonry chimney may hide more damage than the first visit shows. Ask for a written inspection with photos, then compare quotes that list each repair separately and say what liner material and warranty are included.
The estimator on this page adds up the repairs you select from published market data, with a low/typical/high range and labor adjusted to wages in your state. It does not inspect your chimney, so use it to check a quote rather than to decide which repair you need.
Frequently asked questions
How much does a chimney sweep and inspection cost?
A sweep and inspection is sourced at $80 to $380, with a typical $250. It is the right first step before paying for any repair.
What does chimney crown repair cost?
Crown repair or replacement is sourced at $500 to $3,000, typically $1,500. A crack in the crown lets water into the bricks, so it is worth fixing early.
How much is chimney relining?
Replacing the flue liner is sourced at $1,000 to $5,000, typically $2,800. The liner material and the length of the flue set the price.
What do flashing and cap repairs cost?
Flashing repair or replacement is sourced at $200 to $600 (typical $300) and a cap repair or new cap at $100 to $500 (typical $250).
Can I repair my chimney myself?
Replacing a cap is a manageable job if you are comfortable on a roof. Crown, liner and masonry work need a certified chimney professional, and a damaged flue is a fire and carbon monoxide risk.