2 estimators in this trade.
- Basement Waterproofing Cost CalculatorEstimate the total cost to waterproof your basement based on the specific tasks required, from crack injections to full exterior excavation, adjusted for local labor rates.Open estimator →
- Finished Basement Cost EstimatorEstimate the cost to finish a basement based on your room dimensions, selected tasks, and local labor rates.Open estimator →
What drives the price
| Factor | Options | Price effect |
|---|---|---|
| Flooring type | Vinyl plank (LVP), Carpet, Tile, Laminate, Hardwood | Price effect: ×1 to ×2.4 |
| Bathroom type | Full bath (toilet, sink, shower or tub), Half bath (toilet and sink) | Price effect: ×0.45 to ×1 |
| Ceiling type | Drywall, Drop (suspended) ceiling, Exposed, painted | Price effect: ×0.5 to ×1 |
Price ranges by job
| Job | Low (per unit) | Typical | High |
|---|---|---|---|
| Interior perimeter drain (weeping tile), per linear ft | Low $50/linear ft | Typical $85/linear ft | High $120/linear ft |
| Sump pump and pit, installed | Low $700 | Typical $1,500 | High $3,000 |
| Wall crack injection (per crack) | Low $250 | Typical $600 | High $1,500 |
| Interior wall sealant or waterproof coating (per sq ft of wall) | Low $3.00/sq ft | Typical $5.00/sq ft | High $7.00/sq ft |
| Exterior excavation and waterproof membrane (per linear ft of wall) | Low $80/linear ft | Typical $150/linear ft | High $300/linear ft |
| Basement wall framing, installed (per linear ft of wall) | Low $8.00/linear ft | Typical $16/linear ft | High $24/linear ft |
| Basement wall/ceiling insulation (per sq ft) | Low $1.50/sq ft | Typical $2.50/sq ft | High $4.50/sq ft |
| Drywall hang + finish (per sq ft) | Low $1.50/sq ft | Typical $2.50/sq ft | High $3.50/sq ft |
| Electrical rough-in + fixtures for a basement finish (per sq ft of finished area) | Low $2.00/sq ft | Typical $5.50/sq ft | High $9.00/sq ft |
| Basement bathroom rough-in + fixtures (per project) | Low $3,000 | Typical $13,250 | High $25,000 |
| Basement flooring, installed (per sq ft; price depends on the flooring type) | Low $3.00/sq ft | Typical $5.00/sq ft | High $9.00/sq ft |
| Basement ceiling (per sq ft) | Low $2.00/sq ft | Typical $4.50/sq ft | High $8.00/sq ft |
| Egress window (per window) | Low $2,500 | Typical $4,200 | High $5,898 |
| Interior painting, walls + ceiling, labor and paint (per sq ft of wall area) | Low $1.50/sq ft | Typical $3.88/sq ft | High $6.75/sq ft |
| Baseboard trim (per linear ft) | Low $6.00/linear ft | Typical $9.50/linear ft | High $14/linear ft |
| Building permit and inspections | Low $500 | Typical $1,000 | High $2,000 |
Read more about basement renovation costs
Square footage matters, but so does what is already there: existing moisture problems need to be solved first (a French drain, sump pump, or vapor barrier can be its own project before finishing starts), and older homes may have low ceiling height, outdated wiring, or asbestos-containing materials that need special handling. Permits are typically required for a livable basement, especially if a bedroom or bathroom is involved, and local codes on egress and ceiling height can rule out some layouts entirely. Ask contractors to separate the waterproofing, framing, and any plumbing/electrical work as line items in the quote.
The estimator on this page calculates a low/typical/high range per square foot for basic basement finishing, based on published market data. It does not itemize add-ons like a bathroom, wet bar, or egress window, so use it as a starting range and add those separately when comparing quotes.
Waterproofing has its own estimator here, because it is usually the job that has to come first. An interior perimeter drain with a sump pump handles water that already gets in, sealants and coatings only help with dampness, and digging out the outside of the wall to add a membrane is the most thorough fix and the most expensive one. That estimator prices each of those parts from the same kind of sourced data.
Frequently asked questions
How much does basement waterproofing cost?
It depends on the method. An interior perimeter drain is sourced at $50 to $120 per linear foot, a sump pump with its pit at $700 to $3,000, and exterior excavation with a membrane at $80 to $300 per linear foot of wall.
How much does it cost to frame a basement?
Framing is sourced at $8 to $24 per linear foot of wall installed, with a typical $16. Masonry and poured concrete walls are priced differently from precast panels.
How much does adding a basement bathroom cost?
Bathroom plumbing is sourced at $3,000 to $25,000 for the project, typically $13,250. It is often the largest single line item in a basement finish.
What does an egress window cost?
An egress window is sourced at $2,500 to $5,898 each, typically $4,200. Local code usually requires one for a legal bedroom.
What do drywall and flooring cost per square foot?
Drywall is sourced at $1.50 to $3.50 per square foot and flooring at $3 to $9, depending on the type you choose. Electrical work adds $2 to $9 per square foot.
Do I need permits and a moisture check first?
Usually yes for a livable basement, and electrical and plumbing work normally needs licensed trades. Fix any moisture problem before framing, and ask contractors to list waterproofing separately.