{"slug":"finished-basement-cost-estimator","lang":"en","category":"Basement Renovation","subcategory":"basement costs","ui":{"inputs":[{"name":"shared__length","label":"Basement length","type":"number","required":true,"default_value":40,"min":0.1,"unit":"ft","help":"Enter the basement length in ft."},{"name":"shared__width","label":"Basement width","type":"number","required":true,"default_value":25,"min":0.1,"unit":"ft","help":"Enter the basement width in ft."},{"name":"shared__height","label":"Ceiling height","type":"number","required":true,"default_value":8,"min":0.1,"unit":"ft","help":"Enter the ceiling height in ft."},{"name":"task__framing","label":"Basement wall framing, installed (per linear ft of wall)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"task__insulation","label":"Basement wall/ceiling insulation (per sq ft)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"task__drywall","label":"Drywall hang + finish (per sq ft)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"task__electrical","label":"Electrical rough-in + fixtures for a basement finish (per sq ft of finished area)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"}]},{"name":"task__plumbing_bathroom","label":"Basement bathroom rough-in + fixtures (per project)","type":"select","required":true,"default_value":"skip","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"bath_type","label":"Bathroom type","type":"select","required":true,"default_value":"full","options":[{"value":"full","label":"Full bath (toilet, sink, shower or tub)"},{"value":"half","label":"Half bath (toilet and sink)"}],"show_if":{"task__plumbing_bathroom":["pro","diy"]}},{"name":"task__flooring","label":"Basement flooring, installed (per sq ft; price depends on the flooring type)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"flooring_type","label":"Flooring type","type":"select","required":true,"default_value":"vinyl_lvp","options":[{"value":"vinyl_lvp","label":"Vinyl plank (LVP)"},{"value":"carpet","label":"Carpet"},{"value":"tile","label":"Tile"},{"value":"laminate","label":"Laminate"},{"value":"hardwood","label":"Hardwood"}],"show_if":{"task__flooring":["pro","diy"]}},{"name":"task__ceiling","label":"Basement ceiling (per sq ft)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"ceiling_type","label":"Ceiling type","type":"select","required":true,"default_value":"drywall","options":[{"value":"drywall","label":"Drywall"},{"value":"drop","label":"Drop (suspended) ceiling"},{"value":"exposed","label":"Exposed, painted"}],"show_if":{"task__ceiling":["pro","diy"]}},{"name":"task__egress_window","label":"Egress window (per window)","type":"select","required":true,"default_value":"skip","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"}]},{"name":"quantity__egress_window","label":"Number of egress windows","type":"number","required":true,"default_value":1,"min":0.1,"max":1000,"unit":"units","help":"Enter the size in units.","show_if":{"task__egress_window":["pro"]}},{"name":"egress_window_type","label":"Egress window scope","type":"select","required":true,"default_value":"window_well_only","options":[{"value":"window_well_only","label":"Add window well to existing opening"},{"value":"full_egress_kit","label":"Full egress window kit (new opening + well + window)"}],"show_if":{"task__egress_window":["pro"]}},{"name":"task__paint","label":"Interior painting, walls + ceiling, labor and paint (per sq ft of wall area)","type":"select","required":true,"default_value":"pro","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"task__baseboard","label":"Baseboard trim (per linear ft)","type":"select","required":true,"default_value":"skip","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"},{"value":"diy","label":"DIY (materials only)"}]},{"name":"task__permit","label":"Building permit and inspections","type":"select","required":true,"default_value":"skip","options":[{"value":"skip","label":"Skip this task"},{"value":"pro","label":"Hire a pro"}]},{"name":"state","label":"Location (state or metro area)","type":"select","required":true,"default_value":"US","options":[{"value":"US","label":"National average"},{"value":"AL","label":"Alabama (AL)"},{"value":"AK","label":"Alaska (AK)"},{"value":"AZ","label":"Arizona (AZ)"},{"value":"AR","label":"Arkansas (AR)"},{"value":"CA","label":"California (CA)"},{"value":"CO","label":"Colorado (CO)"},{"value":"CT","label":"Connecticut (CT)"},{"value":"DE","label":"Delaware (DE)"},{"value":"FL","label":"Florida (FL)"},{"value":"GA","label":"Georgia (GA)"},{"value":"HI","label":"Hawaii (HI)"},{"value":"ID","label":"Idaho (ID)"},{"value":"IL","label":"Illinois (IL)"},{"value":"IN","label":"Indiana (IN)"},{"value":"IA","label":"Iowa (IA)"},{"value":"KS","label":"Kansas (KS)"},{"value":"KY","label":"Kentucky (KY)"},{"value":"LA","label":"Louisiana (LA)"},{"value":"ME","label":"Maine (ME)"},{"value":"MD","label":"Maryland (MD)"},{"value":"MA","label":"Massachusetts (MA)"},{"value":"MI","label":"Michigan (MI)"},{"value":"MN","label":"Minnesota (MN)"},{"value":"MS","label":"Mississippi (MS)"},{"value":"MO","label":"Missouri (MO)"},{"value":"MT","label":"Montana (MT)"},{"value":"NE","label":"Nebraska (NE)"},{"value":"NV","label":"Nevada (NV)"},{"value":"NH","label":"New Hampshire (NH)"},{"value":"NJ","label":"New Jersey (NJ)"},{"value":"NM","label":"New Mexico (NM)"},{"value":"NY","label":"New York (NY)"},{"value":"NC","label":"North Carolina (NC)"},{"value":"ND","label":"North Dakota (ND)"},{"value":"OH","label":"Ohio (OH)"},{"value":"OK","label":"Oklahoma (OK)"},{"value":"OR","label":"Oregon (OR)"},{"value":"PA","label":"Pennsylvania (PA)"},{"value":"RI","label":"Rhode Island (RI)"},{"value":"SC","label":"South Carolina (SC)"},{"value":"SD","label":"South Dakota (SD)"},{"value":"TN","label":"Tennessee (TN)"},{"value":"TX","label":"Texas (TX)"},{"value":"UT","label":"Utah (UT)"},{"value":"VT","label":"Vermont (VT)"},{"value":"VA","label":"Virginia (VA)"},{"value":"WA","label":"Washington (WA)"},{"value":"WV","label":"West Virginia (WV)"},{"value":"WI","label":"Wisconsin (WI)"},{"value":"WY","label":"Wyoming (WY)"},{"value":"DC","label":"District of Columbia (DC)"},{"value":"M10420","label":"Akron, OH (metro)"},{"value":"M10580","label":"Albany-Schenectady-Troy, NY (metro)"},{"value":"M10740","label":"Albuquerque, NM (metro)"},{"value":"M10900","label":"Allentown-Bethlehem-Easton, PA-NJ (metro)"},{"value":"M11260","label":"Anchorage, AK (metro)"},{"value":"M12060","label":"Atlanta-Sandy Springs-Alpharetta, GA (metro)"},{"value":"M12260","label":"Augusta-Richmond County, GA-SC (metro)"},{"value":"M12420","label":"Austin-Round Rock-San Marcos, TX (metro)"},{"value":"M12540","label":"Bakersfield-Delano, CA (metro)"},{"value":"M12580","label":"Baltimore-Columbia-Towson, MD (metro)"},{"value":"M12940","label":"Baton Rouge, LA (metro)"},{"value":"M13820","label":"Birmingham-Hoover, AL (metro)"},{"value":"M14260","label":"Boise City, ID (metro)"},{"value":"M14460","label":"Boston-Cambridge-Newton, MA-NH (metro)"},{"value":"M14860","label":"Bridgeport-Stamford-Norwalk, CT (metro)"},{"value":"M15380","label":"Buffalo-Cheektowaga, NY (metro)"},{"value":"M15980","label":"Cape Coral-Fort Myers, FL (metro)"},{"value":"M16700","label":"Charleston-North Charleston, SC (metro)"},{"value":"M16740","label":"Charlotte-Concord-Gastonia, NC-SC (metro)"},{"value":"M16860","label":"Chattanooga, TN-GA (metro)"},{"value":"M16980","label":"Chicago-Naperville-Elgin, IL-IN-WI (metro)"},{"value":"M17140","label":"Cincinnati, OH-KY-IN (metro)"},{"value":"M17410","label":"Cleveland, OH (metro)"},{"value":"M17820","label":"Colorado Springs, CO (metro)"},{"value":"M17900","label":"Columbia, SC (metro)"},{"value":"M18140","label":"Columbus, OH (metro)"},{"value":"M18580","label":"Corpus Christi, TX (metro)"},{"value":"M19100","label":"Dallas-Fort Worth-Arlington, TX (metro)"},{"value":"M19660","label":"Deltona-Daytona Beach-Ormond Beach, FL (metro)"},{"value":"M19740","label":"Denver-Aurora-Lakewood, CO (metro)"},{"value":"M19780","label":"Des Moines-West Des Moines, IA (metro)"},{"value":"M19820","label":"Detroit-Warren-Dearborn, MI (metro)"},{"value":"M20500","label":"Durham-Chapel Hill, NC (metro)"},{"value":"M21340","label":"El Paso, TX (metro)"},{"value":"M22020","label":"Fargo, ND-MN (metro)"},{"value":"M22180","label":"Fayetteville, NC (metro)"},{"value":"M23060","label":"Fort Wayne, IN (metro)"},{"value":"M23420","label":"Fresno, CA (metro)"},{"value":"M24340","label":"Grand Rapids-Wyoming-Kentwood, MI (metro)"},{"value":"M24660","label":"Greensboro-High Point, NC (metro)"},{"value":"M24860","label":"Greenville-Anderson-Greer, SC (metro)"},{"value":"M25060","label":"Gulfport-Biloxi, MS (metro)"},{"value":"M25420","label":"Harrisburg-Carlisle, PA (metro)"},{"value":"M25540","label":"Hartford-West Hartford-East Hartford, CT (metro)"},{"value":"M26420","label":"Houston-The Woodlands-Sugar Land, TX (metro)"},{"value":"M26620","label":"Huntsville, AL (metro)"},{"value":"M26900","label":"Indianapolis-Carmel-Anderson, IN (metro)"},{"value":"M27140","label":"Jackson, MS (metro)"},{"value":"M27260","label":"Jacksonville, FL (metro)"},{"value":"M28140","label":"Kansas City, MO-KS (metro)"},{"value":"M28940","label":"Knoxville, TN (metro)"},{"value":"M29460","label":"Lakeland-Winter Haven, FL (metro)"},{"value":"M29540","label":"Lancaster, PA (metro)"},{"value":"M29620","label":"Lansing-East Lansing, MI (metro)"},{"value":"M29740","label":"Las Cruces, NM (metro)"},{"value":"M29820","label":"Las Vegas-Henderson-Paradise, NV (metro)"},{"value":"M30460","label":"Lexington-Fayette, KY (metro)"},{"value":"M30780","label":"Little Rock-North Little Rock-Conway, AR (metro)"},{"value":"M31080","label":"Los Angeles-Long Beach-Anaheim, CA (metro)"},{"value":"M31140","label":"Louisville/Jefferson County, KY-IN (metro)"},{"value":"M31540","label":"Madison, WI (metro)"},{"value":"M31700","label":"Manchester-Nashua, NH (metro)"},{"value":"M32580","label":"McAllen-Edinburg-Mission, TX (metro)"},{"value":"M32820","label":"Memphis, TN-MS-AR (metro)"},{"value":"M33100","label":"Miami-Fort Lauderdale-West Palm Beach, FL (metro)"},{"value":"M33340","label":"Milwaukee-Waukesha, WI (metro)"},{"value":"M33460","label":"Minneapolis-St. Paul-Bloomington, MN-WI (metro)"},{"value":"M33660","label":"Mobile, AL (metro)"},{"value":"M33700","label":"Modesto, CA (metro)"},{"value":"M34980","label":"Nashville-Davidson-Murfreesboro-Franklin, TN (metro)"},{"value":"M35300","label":"New Haven, CT (metro)"},{"value":"M35380","label":"New Orleans-Metairie, LA (metro)"},{"value":"M35620","label":"New York-Newark-Jersey City, NY-NJ-PA (metro)"},{"value":"M35840","label":"North Port-Bradenton-Sarasota, FL (metro)"},{"value":"M36100","label":"Ocala, FL (metro)"},{"value":"M36420","label":"Oklahoma City, OK (metro)"},{"value":"M36540","label":"Omaha, NE-IA (metro)"},{"value":"M36740","label":"Orlando-Kissimmee-Sanford, FL (metro)"},{"value":"M37100","label":"Oxnard-Thousand Oaks-Ventura, CA (metro)"},{"value":"M37340","label":"Palm Bay-Melbourne-Titusville, FL (metro)"},{"value":"M37860","label":"Pensacola-Ferry Pass-Brent, FL (metro)"},{"value":"M37980","label":"Philadelphia-Camden-Wilmington, PA-NJ-DE-MD (metro)"},{"value":"M38060","label":"Phoenix-Mesa-Chandler, AZ (metro)"},{"value":"M38300","label":"Pittsburgh, PA (metro)"},{"value":"M38940","label":"Port St. Lucie, FL (metro)"},{"value":"M38860","label":"Portland-South Portland, ME (metro)"},{"value":"M38900","label":"Portland-Vancouver-Hillsboro, OR-WA (metro)"},{"value":"M39300","label":"Providence-Warwick, RI-MA (metro)"},{"value":"M39340","label":"Provo-Orem-Lehi, UT (metro)"},{"value":"M39580","label":"Raleigh-Cary, NC (metro)"},{"value":"M39900","label":"Reno, NV (metro)"},{"value":"M40060","label":"Richmond, VA (metro)"},{"value":"M40140","label":"Riverside-San Bernardino-Ontario, CA (metro)"},{"value":"M40380","label":"Rochester, NY (metro)"},{"value":"M40900","label":"Sacramento-Roseville-Folsom, CA (metro)"},{"value":"M41420","label":"Salem, OR (metro)"},{"value":"M41620","label":"Salt Lake City-Murray, UT (metro)"},{"value":"M41700","label":"San Antonio-New Braunfels, TX (metro)"},{"value":"M41740","label":"San Diego-Chula Vista-Carlsbad, CA (metro)"},{"value":"M41860","label":"San Francisco-Oakland-Berkeley, CA (metro)"},{"value":"M41940","label":"San Jose-Sunnyvale-Santa Clara, CA (metro)"},{"value":"M42220","label":"Santa Rosa-Petaluma, CA (metro)"},{"value":"M42340","label":"Savannah, GA (metro)"},{"value":"M42540","label":"Scranton--Wilkes-Barre, PA (metro)"},{"value":"M42660","label":"Seattle-Tacoma-Bellevue, WA (metro)"},{"value":"M43340","label":"Shreveport-Bossier City, LA (metro)"},{"value":"M43620","label":"Sioux Falls, SD (metro)"},{"value":"M44060","label":"Spokane-Spokane Valley, WA (metro)"},{"value":"M41180","label":"St. Louis, MO-IL (metro)"},{"value":"M44700","label":"Stockton, CA (metro)"},{"value":"M45060","label":"Syracuse, NY (metro)"},{"value":"M45300","label":"Tampa-St. Petersburg-Clearwater, FL (metro)"},{"value":"M45780","label":"Toledo, OH (metro)"},{"value":"M45940","label":"Trenton-Princeton, NJ (metro)"},{"value":"M46060","label":"Tucson, AZ (metro)"},{"value":"M46140","label":"Tulsa, OK (metro)"},{"value":"M46520","label":"Urban Honolulu, HI (metro)"},{"value":"M47260","label":"Virginia Beach-Norfolk-Newport News, VA-NC (metro)"},{"value":"M47900","label":"Washington-Arlington-Alexandria, DC-VA-MD-WV (metro)"},{"value":"M48620","label":"Wichita, KS (metro)"},{"value":"M49180","label":"Winston-Salem, NC (metro)"},{"value":"M49340","label":"Worcester, MA-CT (metro)"},{"value":"M49660","label":"Youngstown-Warren, OH (metro)"}],"help":"Labor costs vary by state and metro area (a metro area replaces the state figure); material costs are assumed nationwide."}]},"logic_script":"var QTY_MAX = {\"sq_ft\":100000,\"square\":1000,\"each\":1000,\"linear_ft\":10000,\"hour\":2000};\nvar QTY_MAX_LABEL = {\"sq_ft\":\"100,000\",\"square\":\"1,000\",\"each\":\"1,000\",\"linear_ft\":\"10,000\",\"hour\":\"2,000\"};\nvar UNIT_ONE = {\"sq_ft\":\"sq ft\",\"square\":\"roofing square (100 sq ft)\",\"each\":\"unit\",\"linear_ft\":\"linear ft\",\"hour\":\"hour\",\"project\":\"project\"};\nvar UNIT_MANY = {\"sq_ft\":\"sq ft\",\"square\":\"roofing squares\",\"each\":\"units\",\"linear_ft\":\"linear ft\",\"hour\":\"hours\",\"project\":\"projects\"};\nfunction selOpt(mod, value) {\n  for (var i = 0; i < mod.options.length; i++) { if (mod.options[i].value === value) return mod.options[i]; }\n  for (var i = 0; i < mod.options.length; i++) { if (mod.options[i].value === mod.default) return mod.options[i]; }\n  return null;\n}\nfunction applyMods(itemId, qty, steps) {\n  var matProd = 1, laborProd = 1, addM = [0, 0, 0], addL = [0, 0, 0];\n  var mods = data.modifiers || [];\n  for (var i = 0; i < mods.length; i++) {\n    var m = mods[i];\n    if (m.kind === 'qty_tier' && m.applies_to.indexOf(itemId) !== -1) {\n      var tier = null;\n      for (var ti = 0; ti < m.tiers.length; ti++) { if (qty >= m.tiers[ti].min_qty && (!tier || m.tiers[ti].min_qty > tier.min_qty)) tier = m.tiers[ti]; }\n      if (tier) {\n        var tl = tier.labor_mult !== undefined ? tier.labor_mult : 1;\n        var tm = tier.material_mult !== undefined ? tier.material_mult : 1;\n        laborProd *= tl; matProd *= tm;\n        var tparts = [];\n        if (tl !== 1) tparts.push('labor x' + tl);\n        if (tm !== 1) tparts.push('materials x' + tm);\n        steps.push(m.label + ': ' + tier.min_qty + ' or more qualifies (' + tparts.join(', ') + ')' + (tier.basis === 'reasoned' ? ' (estimate adjustment' + (tier.rationale ? ': ' + tier.rationale : '') + ')' : '') + '.');\n      }\n      continue;\n    }\n    if (m.kind !== 'select' || m.applies_to.indexOf(itemId) === -1) continue;\n    var val = inputs[m.id]; if (val === undefined || val === null || val === '') val = m.default;\n    var opt = selOpt(m, val);\n    if (!opt) continue;\n    var lm = opt.labor_mult !== undefined ? opt.labor_mult : 1;\n    var mm = opt.material_mult !== undefined ? opt.material_mult : 1;\n    laborProd *= lm; matProd *= mm;\n    if (opt.add) {\n      var per = opt.add.per === 'qty' ? qty : 1;\n      var lsA = opt.add.labor_share;\n      addM[0] += opt.add.low * (1 - lsA) * per; addM[1] += opt.add.mid * (1 - lsA) * per; addM[2] += opt.add.high * (1 - lsA) * per;\n      addL[0] += opt.add.low * lsA * per; addL[1] += opt.add.mid * lsA * per; addL[2] += opt.add.high * lsA * per;\n    }\n    if (opt.value !== m.default) {\n      steps.push(m.label + ': ' + opt.label + (opt.basis === 'reasoned' ? ' (estimate adjustment' + (opt.rationale ? ': ' + opt.rationale : '') + ')' : '') + '.');\n    }\n  }\n  return { matProd: matProd, laborProd: laborProd, addM: addM, addL: addL };\n}\n// Un paso de cantidad/info: acc <op> (by x scale). \"by\" numerico o id de un valor de \"vals\".\nfunction stepApply(acc, st, vals) {\n  var by = typeof st.by === 'number' ? st.by : vals[st.by];\n  if (st.scale !== undefined) by = by * st.scale;\n  if (st.op === 'mul') return acc * by;\n  if (st.op === 'div') return acc / by;\n  if (st.op === 'add') return acc + by;\n  return acc - by;\n}\n// Entrada compartida (data.shared_inputs) por id.\nfunction sharedById(id) {\n  var list = data.shared_inputs || [];\n  for (var i = 0; i < list.length; i++) { if (list[i].id === id) return list[i]; }\n  return null;\n}\n// Devuelve { found, qty, invalidField }: found=false = itemId no tiene DerivedQty (usar la\n// cantidad manual de siempre); found=true, qty=null = SI tiene, pero el resultado no es un numero\n// utilizable (entradas extremas -> overflow a Infinity, o <= 0): antes se dejaba pasar y\n// aparecia 'Infinity'/el guion largo en steps/footprint (el fuzzing de validateToolLogic lo\n// detecta como salida invalida sin marcar el campo culpable, CA bloqueante).\nfunction derivedFor(itemId, steps) {\n  var mods = data.modifiers || [];\n  for (var i = 0; i < mods.length; i++) {\n    var m = mods[i];\n    if (m.kind !== 'derived' || m.item !== itemId) continue;\n    var vals = {};\n    // Entradas: primero las compartidas (campo shared__<id>, una sola vez en la UI), luego las propias.\n    var specs = [];\n    var sh = m.shared || [];\n    for (var q = 0; q < sh.length; q++) { var si = sharedById(sh[q]); specs.push({ id: sh[q], field: 'shared__' + sh[q], def: si ? si.default : 1 }); }\n    for (var j = 0; j < m.inputs.length; j++) { specs.push({ id: m.inputs[j].id, field: m.id + '__' + m.inputs[j].id, def: m.inputs[j].default }); }\n    for (var j = 0; j < specs.length; j++) {\n      var raw = inputs[specs[j].field];\n      // Campo ausente (p. ej. un test_case que no lo nombra): valor por defecto. Presente pero no\n      // numérico o ≤ 0 (\"abc\", vacío): se señala en su campo; antes se sustituía en silencio por el\n      // valor por defecto y el usuario no veía el error (smoke-test de painting, 29/09).\n      if (raw === undefined || raw === null) { vals[specs[j].id] = specs[j].def; continue; }\n      var v = lib.numEn(raw);\n      if (!isFinite(v) || v <= 0) return { found: true, qty: null, invalidField: specs[j].field };\n      vals[specs[j].id] = v;\n    }\n    var acc = vals[specs[0].id];\n    for (var k = 0; k < m.steps.length; k++) acc = stepApply(acc, m.steps[k], vals);\n    if (m.round === 'ceil') acc = Math.ceil(acc);\n    if (!isFinite(acc) || acc <= 0) return { found: true, qty: null, invalidField: specs[0].field };\n    steps.push(m.label + ': ' + lib.round(acc, 2) + ' ' + m.unit + '.');\n    return { found: true, qty: acc, invalidField: null };\n  }\n  return { found: false, qty: null, invalidField: null };\n}\n// Salidas informativas (modifiers kind 'info') de la partida: parten de su cantidad final y no\n// cambian el coste. \"by\" numerico, id de un select con valores numericos o input (propio o\n// compartido) de su DerivedQty. Devuelve una lista { label, unit, value }.\nfunction infoValuesFor(itemId, qty) {\n  var out = [];\n  var mods = data.modifiers || [];\n  for (var i = 0; i < mods.length; i++) {\n    var m = mods[i];\n    if (m.kind !== 'info' || m.item !== itemId) continue;\n    var vals = {};\n    for (var j = 0; j < mods.length; j++) {\n      var d = mods[j];\n      if (d.kind === 'select') { var sv = inputs[d.id]; vals[d.id] = Number((sv === undefined || sv === null || sv === '') ? d.default : sv); }\n      else if (d.kind === 'derived' && d.item === itemId) {\n        var dsh = d.shared || [];\n        for (var k = 0; k < dsh.length; k++) {\n          var sv2 = inputs['shared__' + dsh[k]]; var sdef = sharedById(dsh[k]);\n          vals[dsh[k]] = (sv2 === undefined || sv2 === null) ? (sdef ? sdef.default : 1) : lib.numEn(sv2);\n        }\n        for (var k = 0; k < d.inputs.length; k++) {\n          var iv = inputs[d.id + '__' + d.inputs[k].id];\n          vals[d.inputs[k].id] = (iv === undefined || iv === null) ? d.inputs[k].default : lib.numEn(iv);\n        }\n      }\n    }\n    var acc = qty;\n    for (var s = 0; s < m.steps.length; s++) acc = stepApply(acc, m.steps[s], vals);\n    if (m.round === 'ceil') acc = Math.ceil(acc);\n    if (!isFinite(acc)) continue;\n    out.push({ label: m.label, unit: m.unit, value: acc });\n  }\n  return out;\n}\nfunction infoRowsFor(itemId, qty, result, steps) {\n  var rows = infoValuesFor(itemId, qty);\n  for (var r = 0; r < rows.length; r++) {\n    result[rows[r].label] = lib.round(rows[r].value, 2) + ' ' + rows[r].unit;\n    steps.push(rows[r].label + ': ' + lib.round(rows[r].value, 2) + ' ' + rows[r].unit + '.');\n  }\n}\n// Cobro minimo (data.minimum_charge): low/mid/high nunca bajan de esas cifras (no aplica si todo es\n// DIY). Lo que se sube se cuenta como mano de obra para que Materials + Labor cuadre con el total.\nfunction applyMin(t, allDiy, steps) {\n  var mc = data.minimum_charge;\n  if (!mc || allDiy) return t;\n  var low = Math.max(t.low, mc.low), mid = Math.max(t.mid, mc.mid), high = Math.max(t.high, mc.high);\n  if (mid !== t.mid) {\n    steps.push('Minimum charge: most contractors bill at least ' + lib.usd(mc.mid) + ' for a job like this, so the typical cost is raised from ' + lib.usd(t.mid) + ' to ' + lib.usd(mid) + '.');\n  } else if (low !== t.low || high !== t.high) {\n    steps.push('Minimum charge: the low and high estimates are raised to ' + lib.usd(low) + ' and ' + lib.usd(high) + '.');\n  }\n  return { low: low, mid: mid, high: high, matMid: t.matMid, labMid: t.labMid + (mid - t.mid), savedLabor: t.savedLabor };\n}\nfunction ratioFor(state) {\n  var ratio = 1, place = 'the U.S. (national average)';\n  if (table && table.rows) { for (var r = 0; r < table.rows.length; r++) { if (table.rows[r][0] === state) { ratio = Number(table.rows[r][2]); if (state !== 'US') place = String(table.rows[r][1]); break; } } }\n  if (!isFinite(ratio) || ratio <= 0) ratio = 1;\n  return { ratio: ratio, place: place };\n}\nfunction computeItem(item, qty, qMult, ratio, diyAllowed, diy, steps) {\n  var mods = applyMods(item.id, qty, steps);\n  var ls = item.labor_share;\n  var baseLow = qty * item.low * qMult, baseMid = qty * item.mid * qMult, baseHigh = qty * item.high * qMult;\n  var matLow = baseLow * (1 - ls) * mods.matProd + mods.addM[0];\n  var matMid = baseMid * (1 - ls) * mods.matProd + mods.addM[1];\n  var matHigh = baseHigh * (1 - ls) * mods.matProd + mods.addM[2];\n  var labLow = baseLow * ls * mods.laborProd * ratio + mods.addL[0] * ratio;\n  var labMid = baseMid * ls * mods.laborProd * ratio + mods.addL[1] * ratio;\n  var labHigh = baseHigh * ls * mods.laborProd * ratio + mods.addL[2] * ratio;\n  var doDiy = diyAllowed && diy;\n  return {\n    low: doDiy ? matLow : matLow + labLow, mid: doDiy ? matMid : matMid + labMid, high: doDiy ? matHigh : matHigh + labHigh,\n    matMid: matMid, labMid: doDiy ? 0 : labMid, savedLabor: labMid\n  };\n}\nif (!data.items.length) return { result: 'No tasks available.', footprint: 'No cost data available.', invalid: 'task__' };\nvar rf = ratioFor(inputs.state);\nvar ratio = rf.ratio, place = rf.place;\nvar totalLow = 0, totalMid = 0, totalHigh = 0, totalMat = 0, totalLab = 0, totalSaved = 0;\nvar anySelected = false, anyDiy = false, anyPro = false;\nvar infoTotals = {}, infoOrder = [];\nvar steps = [];\nfor (var idx = 0; idx < data.items.length; idx++) {\n  var it = data.items[idx];\n  var task = inputs['task__' + it.id];\n  if (!task || task === 'skip') continue;\n  anySelected = true;\n  var derivedSteps = [];\n  var derived = derivedFor(it.id, derivedSteps);\n  var qty;\n  if (derived.found) {\n    if (derived.qty === null) return { result: 'Enter valid measurements greater than 0 for ' + it.label + '.', footprint: 'Waiting for valid measurements.', invalid: derived.invalidField };\n    qty = derived.qty;\n  } else {\n    qty = it.unit === 'project' ? 1 : lib.numEn(inputs['quantity__' + it.id]);\n    if (!isFinite(qty) || qty <= 0) return { result: 'Enter a project size greater than 0 for ' + it.label + '.', footprint: 'Waiting for a valid project size.', invalid: 'quantity__' + it.id };\n    if (QTY_MAX[it.unit] && qty > QTY_MAX[it.unit]) return { result: 'Enter ' + QTY_MAX_LABEL[it.unit] + ' ' + UNIT_MANY[it.unit] + ' or less.', footprint: 'Waiting for a valid project size.', invalid: 'quantity__' + it.id };\n  }\n  var itemDiyOk = it.diy_allowed !== false;\n  var diy = itemDiyOk && task === 'diy';\n  if (diy) anyDiy = true; else anyPro = true;\n  var modSteps = [];\n  var comp = computeItem(it, qty, 1, ratio, itemDiyOk, diy, modSteps);\n  totalLow += comp.low; totalMid += comp.mid; totalHigh += comp.high; totalMat += comp.matMid; totalLab += comp.labMid; if (diy) totalSaved += comp.savedLabor; // solo lo que de verdad haces tú (antes sumaba también la mano de obra de las tareas en pro)\n  var unitQty = qty === 1 ? (UNIT_ONE[it.unit] || it.unit) : (UNIT_MANY[it.unit] || it.unit);\n  steps = steps.concat(derivedSteps);\n  var unitOneS = UNIT_ONE[it.unit] || it.unit;\n  var unitPrice = it.mid < 100 ? 2 : 0;\n  steps.push(it.label + ': national typical price ' + lib.usd(it.mid, unitPrice) + ' per ' + unitOneS + ' (range ' + lib.usd(it.low, unitPrice) + ' to ' + lib.usd(it.high, unitPrice) + ').');\n  steps.push(it.label + ' (' + (diy ? 'DIY, materials only' : 'pro') + '): ' + qty + ' ' + unitQty + ' x ' + lib.usd(it.mid, unitPrice) + ' = ' + lib.usd(qty * it.mid) + ' before adjustments.');\n  steps = steps.concat(modSteps);\n  steps.push(it.label + ' (' + (diy ? 'DIY' : 'pro') + ') after ' + (diy ? 'materials adjustments' : 'the regional labor factor and adjustments') + ': ' + lib.usd(comp.mid) + ' (range ' + lib.usd(comp.low) + ' to ' + lib.usd(comp.high) + ').');\n  // Salidas informativas: las de igual etiqueta de todas las tareas activas se suman.\n  var taskInfo = infoValuesFor(it.id, qty);\n  for (var ii = 0; ii < taskInfo.length; ii++) {\n    var infoKey = taskInfo[ii].label;\n    if (!infoTotals[infoKey]) { infoTotals[infoKey] = { unit: taskInfo[ii].unit, value: 0 }; infoOrder.push(infoKey); }\n    infoTotals[infoKey].value += taskInfo[ii].value;\n  }\n}\nif (!anySelected) return { result: 'Select at least one task.', footprint: 'Waiting for at least one task.', invalid: 'task__' + data.items[0].id };\nvar minSteps = [];\nvar grand = applyMin({ low: totalLow, mid: totalMid, high: totalHigh, matMid: totalMat, labMid: totalLab, savedLabor: totalSaved }, !anyPro, minSteps);\ntotalLow = grand.low; totalMid = grand.mid; totalHigh = grand.high; totalLab = grand.labMid;\nvar result = {\n  'Typical cost': lib.usd(totalMid),\n  'Low estimate': lib.usd(totalLow),\n  'High estimate': lib.usd(totalHigh),\n  'Materials': lib.usd(totalMat),\n  'Labor': lib.usd(totalLab)\n};\nif (anyDiy) result['DIY labor savings'] = lib.usd(totalSaved);\nfor (var io = 0; io < infoOrder.length; io++) {\n  var infoRow = infoTotals[infoOrder[io]];\n  result[infoOrder[io]] = lib.round(infoRow.value, 2) + ' ' + infoRow.unit;\n  steps.push('Total for all selected tasks, ' + infoOrder[io] + ': ' + lib.round(infoRow.value, 2) + ' ' + infoRow.unit + '.');\n}\nsteps = steps.concat(minSteps);\nif (inputs.state && inputs.state !== 'US') {\n  steps.push('Labor wages in ' + place + ' are adjusted with the BLS regional factor for this trade.');\n}\nsteps.push('Total for all selected tasks: ' + lib.usd(totalMid) + ' (range ' + lib.usd(totalLow) + ' to ' + lib.usd(totalHigh) + ').');\nvar footprint = 'Selected tasks in ' + place + ': typical cost ' + lib.usd(totalMid) + '.';\nreturn { result: result, footprint: footprint, steps: steps };","reference_table":{"caption":"Regional labor cost adjustment (state or metro area wage vs. the national average, BLS OEWS)","headers":["Location","Name","Labor cost factor"],"rows":[["US","National average",1],["AL","Alabama",0.7541],["AK","Alaska",1.226],["AZ","Arizona",0.8987],["AR","Arkansas",0.7824],["CA","California",1.2008],["CO","Colorado",1.0085],["CT","Connecticut",1.0465],["DE","Delaware",0.9552],["FL","Florida",0.8009],["GA","Georgia",0.7663],["HI","Hawaii",1.3329],["ID","Idaho",0.8545],["IL","Illinois",1.2238],["IN","Indiana",0.9896],["IA","Iowa",0.8783],["KS","Kansas",0.906],["KY","Kentucky",0.8353],["LA","Louisiana",0.7862],["ME","Maine",0.9645],["MD","Maryland",1.052],["MA","Massachusetts",1.2141],["MI","Michigan",0.9468],["MN","Minnesota",1.0715],["MS","Mississippi",0.7509],["MO","Missouri",0.9904],["MT","Montana",0.9087],["NE","Nebraska",0.8374],["NV","Nevada",1.0552],["NH","New Hampshire",0.9767],["NJ","New Jersey",1.0969],["NM","New Mexico",0.8751],["NY","New York",1.1575],["NC","North Carolina",0.7696],["ND","North Dakota",0.8834],["OH","Ohio",0.9537],["OK","Oklahoma",0.7559],["OR","Oregon",1.08],["PA","Pennsylvania",0.9633],["RI","Rhode Island",0.98],["SC","South Carolina",0.8434],["SD","South Dakota",0.7821],["TN","Tennessee",0.8226],["TX","Texas",0.7769],["UT","Utah",0.8435],["VT","Vermont",0.9447],["VA","Virginia",0.844],["WA","Washington",1.2063],["WV","West Virginia",0.7701],["WI","Wisconsin",0.995],["WY","Wyoming",0.9043],["DC","District of Columbia",1.0055],["M10420","Akron, OH",0.9712],["M10580","Albany-Schenectady-Troy, NY",1.0136],["M10740","Albuquerque, NM",0.9037],["M10900","Allentown-Bethlehem-Easton, PA-NJ",0.9427],["M11260","Anchorage, AK",1.1982],["M12060","Atlanta-Sandy Springs-Alpharetta, GA",0.7864],["M12260","Augusta-Richmond County, GA-SC",0.8818],["M12420","Austin-Round Rock-San Marcos, TX",0.8205],["M12540","Bakersfield-Delano, CA",1.0879],["M12580","Baltimore-Columbia-Towson, MD",0.9837],["M12940","Baton Rouge, LA",0.8318],["M13820","Birmingham-Hoover, AL",0.7948],["M14260","Boise City, ID",0.8586],["M14460","Boston-Cambridge-Newton, MA-NH",1.2382],["M14860","Bridgeport-Stamford-Norwalk, CT",1.0192],["M15380","Buffalo-Cheektowaga, NY",0.9848],["M15980","Cape Coral-Fort Myers, FL",0.7957],["M16700","Charleston-North Charleston, SC",0.8342],["M16740","Charlotte-Concord-Gastonia, NC-SC",0.8144],["M16860","Chattanooga, TN-GA",0.8127],["M16980","Chicago-Naperville-Elgin, IL-IN-WI",1.2663],["M17140","Cincinnati, OH-KY-IN",0.9464],["M17410","Cleveland, OH",0.9936],["M17820","Colorado Springs, CO",0.933],["M17900","Columbia, SC",0.8115],["M18140","Columbus, OH",1.0308],["M18580","Corpus Christi, TX",0.7841],["M19100","Dallas-Fort Worth-Arlington, TX",0.7655],["M19660","Deltona-Daytona Beach-Ormond Beach, FL",0.7327],["M19740","Denver-Aurora-Lakewood, CO",1.0381],["M19780","Des Moines-West Des Moines, IA",0.9363],["M19820","Detroit-Warren-Dearborn, MI",1.0174],["M20500","Durham-Chapel Hill, NC",0.8022],["M21340","El Paso, TX",0.6762],["M22020","Fargo, ND-MN",0.901],["M22180","Fayetteville, NC",0.7501],["M23060","Fort Wayne, IN",0.9285],["M23420","Fresno, CA",1.0823],["M24340","Grand Rapids-Wyoming-Kentwood, MI",0.8877],["M24660","Greensboro-High Point, NC",0.7684],["M24860","Greenville-Anderson-Greer, SC",0.8415],["M25060","Gulfport-Biloxi, MS",0.7622],["M25420","Harrisburg-Carlisle, PA",0.9322],["M25540","Hartford-West Hartford-East Hartford, CT",1.0821],["M26420","Houston-The Woodlands-Sugar Land, TX",0.8076],["M26620","Huntsville, AL",0.7862],["M26900","Indianapolis-Carmel-Anderson, IN",1.0203],["M27140","Jackson, MS",0.7538],["M27260","Jacksonville, FL",0.8111],["M28140","Kansas City, MO-KS",1.0285],["M28940","Knoxville, TN",0.8155],["M29460","Lakeland-Winter Haven, FL",0.7225],["M29540","Lancaster, PA",0.8836],["M29620","Lansing-East Lansing, MI",0.9569],["M29740","Las Cruces, NM",0.8158],["M29820","Las Vegas-Henderson-Paradise, NV",1.0619],["M30460","Lexington-Fayette, KY",0.8476],["M30780","Little Rock-North Little Rock-Conway, AR",0.7652],["M31080","Los Angeles-Long Beach-Anaheim, CA",1.1976],["M31140","Louisville/Jefferson County, KY-IN",0.8758],["M31540","Madison, WI",1.0379],["M31700","Manchester-Nashua, NH",0.9755],["M32580","McAllen-Edinburg-Mission, TX",0.6325],["M32820","Memphis, TN-MS-AR",0.8132],["M33100","Miami-Fort Lauderdale-West Palm Beach, FL",0.8233],["M33340","Milwaukee-Waukesha, WI",1.0398],["M33460","Minneapolis-St. Paul-Bloomington, MN-WI",1.1362],["M33660","Mobile, AL",0.7657],["M33700","Modesto, CA",1.1373],["M34980","Nashville-Davidson-Murfreesboro-Franklin, TN",0.8644],["M35300","New Haven, CT",1.0792],["M35380","New Orleans-Metairie, LA",0.8123],["M35620","New York-Newark-Jersey City, NY-NJ-PA",1.2275],["M35840","North Port-Bradenton-Sarasota, FL",0.8298],["M36100","Ocala, FL",0.7353],["M36420","Oklahoma City, OK",0.8092],["M36540","Omaha, NE-IA",0.8623],["M36740","Orlando-Kissimmee-Sanford, FL",0.7833],["M37100","Oxnard-Thousand Oaks-Ventura, CA",1.1563],["M37340","Palm Bay-Melbourne-Titusville, FL",0.7626],["M37860","Pensacola-Ferry Pass-Brent, FL",0.7583],["M37980","Philadelphia-Camden-Wilmington, PA-NJ-DE-MD",1.0046],["M38060","Phoenix-Mesa-Chandler, AZ",0.92],["M38300","Pittsburgh, PA",1.0136],["M38940","Port St. Lucie, FL",0.7772],["M38860","Portland-South Portland, ME",1.0148],["M38900","Portland-Vancouver-Hillsboro, OR-WA",1.1876],["M39300","Providence-Warwick, RI-MA",1.0517],["M39340","Provo-Orem-Lehi, UT",0.8261],["M39580","Raleigh-Cary, NC",0.7841],["M39900","Reno, NV",1.025],["M40060","Richmond, VA",0.8155],["M40140","Riverside-San Bernardino-Ontario, CA",1.1202],["M40380","Rochester, NY",0.9557],["M40900","Sacramento-Roseville-Folsom, CA",1.1196],["M41420","Salem, OR",0.9608],["M41620","Salt Lake City-Murray, UT",0.874],["M41700","San Antonio-New Braunfels, TX",0.7538],["M41740","San Diego-Chula Vista-Carlsbad, CA",1.1769],["M41860","San Francisco-Oakland-Berkeley, CA",1.3657],["M41940","San Jose-Sunnyvale-Santa Clara, CA",1.3398],["M42220","Santa Rosa-Petaluma, CA",1.2712],["M42340","Savannah, GA",0.7055],["M42540","Scranton--Wilkes-Barre, PA",0.9448],["M42660","Seattle-Tacoma-Bellevue, WA",1.2808],["M43340","Shreveport-Bossier City, LA",0.7387],["M43620","Sioux Falls, SD",0.8066],["M44060","Spokane-Spokane Valley, WA",1.0286],["M41180","St. Louis, MO-IL",1.091],["M44700","Stockton, CA",1.1173],["M45060","Syracuse, NY",0.9948],["M45300","Tampa-St. Petersburg-Clearwater, FL",0.8269],["M45780","Toledo, OH",0.9535],["M45940","Trenton-Princeton, NJ",1.179],["M46060","Tucson, AZ",0.8223],["M46140","Tulsa, OK",0.7407],["M46520","Urban Honolulu, HI",1.3622],["M47260","Virginia Beach-Norfolk-Newport News, VA-NC",0.8281],["M47900","Washington-Arlington-Alexandria, DC-VA-MD-WV",1.0177],["M48620","Wichita, KS",0.8495],["M49180","Winston-Salem, NC",0.7786],["M49340","Worcester, MA-CT",1.1278],["M49660","Youngstown-Warren, OH",0.8938]]},"cost_data":{"trade":"basement","version":"v4","country":"us","currency":"USD","retrieved_at":"2026-09-29","labor_soc":"47-2031","items":[{"id":"framing","label":"Basement wall framing, installed (per linear ft of wall)","unit":"linear_ft","low":8,"mid":16,"high":24,"labor_share":0.6,"sources":[{"label":"HomeGuide","url":"https://homeguide.com/costs/cost-to-frame-a-basement","quote":"Basement framing costs $18 to $24 per linear foot installed, depending on the wall height, stud spacing, and number of doors or windows to frame around.","retrieved_at":"2026-09-28","low":18,"high":24},{"label":"Bob Vila","url":"https://www.bobvila.com/articles/cost-to-frame-a-basement/","quote":"Precast panel basements are the most affordable to frame, ranging in cost from $8 to $12 per linear foot, while framing a masonry wall will cost about $10 to $12 per linear foot.","retrieved_at":"2026-09-28","low":8,"high":12},{"label":"Bob Vila","url":"https://www.bobvila.com/articles/cost-to-frame-a-basement/","quote":"Framing a poured concrete wall is the most expensive, at $12 to $16 per linear foot.","retrieved_at":"2026-09-28","low":12,"high":16},{"label":"Norman Builders - Average Cost to Finish a Basement","url":"https://normanbuilders.com/average-cost-to-finish-a-basement/","quote":"Framing: Essential for drywall installation. Costs range from $7 to $16 per linear foot.","retrieved_at":"2026-10-03","low":7,"high":16}],"default_task":"pro","default_qty":150,"qty_label":"Wall length to frame"},{"id":"insulation","label":"Basement wall/ceiling insulation (per sq ft)","unit":"sq_ft","low":1.5,"mid":2.5,"high":4.5,"labor_share":0.5,"sources":[{"label":"Angi","url":"https://www.angi.com/articles/how-much-does-insulation-cost.htm","quote":"Insulating a basement costs $1.50 to $2.50 per square foot on average or between $1,400 and $6,300.","retrieved_at":"2026-09-28","low":1.5,"high":2.5},{"label":"Fixr","url":"https://www.fixr.com/costs/home-insulation","quote":"Rigid foam insulation and closed-cell spray foam insulation are the most popular, and these types of basement and crawl space insulation cost between $0.25 and $4.50 per square foot.","retrieved_at":"2026-09-28","low":0.25,"high":4.5},{"label":"VB Insulation - Cost to Insulate Basement","url":"https://vbinsulation.com/blogs/insulation-insider-latest-trends-and-techniques/cost-to-insulate-basement","quote":"Professional Basement Insulation: $1.50 to $4.00 per square foot","retrieved_at":"2026-10-03","low":1.5,"high":4}],"default_task":"pro","default_qty":1000,"qty_label":"Wall area to insulate"},{"id":"drywall","label":"Drywall hang + finish (per sq ft)","unit":"sq_ft","low":1.5,"mid":2.5,"high":3.5,"labor_share":0.7,"sources":[{"label":"Angi","url":"https://www.angi.com/articles/how-much-does-drywall-installation-cost.htm","quote":"The average cost to install drywall includes materials and labor and runs between $1.50 and $3 per square foot.","retrieved_at":"2026-09-28","low":1.5,"high":3},{"label":"HomeGuide","url":"https://homeguide.com/costs/drywall-installation-cost","quote":"Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and finish level.","retrieved_at":"2026-09-28","low":1.5,"high":3.5},{"label":"A2Z Construction - Cost to Drywall a Basement","url":"https://a2zconstructionmgmt.com/home-renovation-blog/cost-to-drywall-basement","quote":"homeowners can expect to pay between $1.50 and $3.50 per square foot for materials and labor","retrieved_at":"2026-10-03","low":1.5,"high":3.5}],"default_task":"pro","default_qty":1000,"qty_label":"Wall area to drywall"},{"id":"electrical","label":"Electrical rough-in + fixtures for a basement finish (per sq ft of finished area)","unit":"sq_ft","low":2,"mid":5.5,"high":9,"labor_share":0.54,"sources":[{"label":"HomeGuide - Cost To Finish A Basement","url":"https://homeguide.com/costs/cost-to-finish-a-basement","quote":"Adding electrical wiring costs $4 to $9 per square foot with labor or $2,000 to $13,500 for an average basement.","retrieved_at":"2026-09-28","low":4,"high":9},{"label":"HomeGuide - Electrical Wiring Cost Guide","url":"https://homeguide.com/costs/electrical-wiring-cost","quote":"New construction electrical wiring costs $4 to $9 per square foot on average, depending on the building size, layout, and number and type of circuits.","retrieved_at":"2026-09-28","low":4,"high":9},{"label":"HomeAdvisor - Cost to Rewire a House","url":"https://www.homeadvisor.com/cost/electrical/rewire-a-house/","quote":"The electrical rough-in cost is a bit lower, at $2 to $4 per square foot.","retrieved_at":"2026-09-28","low":2,"high":4}],"diy_allowed":false,"default_task":"pro","default_qty":1000,"qty_label":"Finished floor area"},{"id":"plumbing_bathroom","label":"Basement bathroom rough-in + fixtures (per project)","unit":"project","low":3000,"mid":13250,"high":25000,"labor_share":0.55,"sources":[{"label":"Angi","url":"https://www.angi.com/articles/what-you-should-know-about-adding-bathroom-basement.htm","quote":"Adding a bathroom to your basement will cost between $10,000 and $15,000, depending on how much plumbing and electrical you need to add.","retrieved_at":"2026-09-28","low":10000,"high":15000},{"label":"HomeGuide","url":"https://homeguide.com/costs/cost-to-put-a-bathroom-in-the-basement","quote":"Adding a full-size basement bathroom costs $10,000 to $25,000, while adding a half bath costs $3,000 to $10,000 with standard features.","retrieved_at":"2026-09-28","low":3000,"high":25000},{"label":"Berry Basements - Adding a Half vs. Full Bathroom","url":"https://www.berrybasements.com/adding-a-half-vs-full-bathroom-in-your-basement/","quote":"Installing a full bathroom can range from $8,000 to $15,000 or more","retrieved_at":"2026-10-03","low":8000,"high":15000}],"default_task":"skip","default_qty":1,"qty_label":"Number of bathrooms"},{"id":"flooring","label":"Basement flooring, installed (per sq ft; price depends on the flooring type)","unit":"sq_ft","low":3,"mid":5,"high":9,"labor_share":0.4,"sources":[{"label":"Angi - Luxury Vinyl Flooring Pros and Cons","url":"https://www.angi.com/articles/luxury-vinyl-flooring-pros-and-cons.htm","quote":"The cost to install luxury vinyl flooring—between $3 and $7 per square foot, including installation—is a price-savvy option for those looking to renovate a home on a budget.","retrieved_at":"2026-09-28","low":3,"high":7},{"label":"RealCostIQ - LVP Flooring Cost","url":"https://realcostiq.com/lvp-flooring-calculator/","quote":"LVP flooring installation costs $3–$9 per square foot installed.","retrieved_at":"2026-09-28","low":3,"high":9},{"label":"Norman Builders - Average Cost to Finish a Basement","url":"https://normanbuilders.com/average-cost-to-finish-a-basement/","quote":"Vinyl can mimic the look of hardwood or tile and costs around $3 to $11 per square foot.","retrieved_at":"2026-10-03","low":3,"high":11}],"default_task":"pro","default_qty":1000,"qty_label":"Floor area"},{"id":"ceiling","label":"Basement ceiling (per sq ft)","unit":"sq_ft","low":2,"mid":4.5,"high":8,"labor_share":0.55,"sources":[{"label":"Honey-Doers - Basement Ceiling Ideas","url":"https://www.honey-doers.com/blog/4-basement-ceiling-ideas-to-finish-your-basement/","quote":"Drywall $2–$4/sq ft","retrieved_at":"2026-09-29","low":2,"high":4},{"label":"Country Creek Builders - Basement Ceiling Options","url":"https://www.countrycreekbuilders.com/blogs/basement-ceiling-options-in-savage-mn-drop-ceilings-vs-drywall-vs-exposed--cost-and-design-comparison","quote":"Drywall ceilings: $4-8 per sq ft installed","retrieved_at":"2026-09-29","low":4,"high":8}],"default_task":"pro","default_qty":1000,"qty_label":"Ceiling area"},{"id":"egress_window","label":"Egress window (per window)","unit":"each","low":2500,"mid":4200,"high":5898,"labor_share":0.5,"sources":[{"label":"Angi","url":"https://www.angi.com/articles/how-much-does-it-cost-install-egress-window.htm","quote":"Most homeowners spend between $2,723 and $5,898 per window, with pricing driven primarily by window size, labor rates, and permit requirements.","retrieved_at":"2026-09-28","low":2723,"high":5898},{"label":"This Old House","url":"https://www.thisoldhouse.com/windows/egress-window-cost","quote":"Egress window installation costs $2,718–$5,878, with a national average of $4,216.","retrieved_at":"2026-09-28","low":2718,"high":5878},{"label":"Fixr","url":"https://www.fixr.com/costs/egress-window-installation","quote":"The national average cost of installing a prefabricated below-ground egress window ranges from $2,500 to $5,000.","retrieved_at":"2026-09-28","low":2500,"high":5000},{"label":"Block Renovation - Basement Remodel Costs","url":"https://www.blockrenovation.com/guides/the-complete-guide-to-basement-remodel-costs","quote":"Egress window $2,500 to $5,500 installed","retrieved_at":"2026-09-29","low":2500,"high":5500}],"diy_allowed":false,"default_task":"skip","default_qty":1,"qty_label":"Number of egress windows"},{"id":"paint","label":"Interior painting, walls + ceiling, labor and paint (per sq ft of wall area)","unit":"sq_ft","low":1.5,"mid":3.88,"high":6.75,"labor_share":0.75,"sources":[{"label":"Angi","url":"https://www.angi.com/articles/how-much-does-interior-painting-cost.htm","quote":"Interior painting costs an average of $2 to $6 per square foot.","retrieved_at":"2026-09-28","low":2,"high":6},{"label":"HomeGuide","url":"https://homeguide.com/costs/cost-to-paint-a-house-interior","quote":"The average cost to paint a house interior is $1 to $3 per square foot of surface area.","retrieved_at":"2026-09-28","low":1,"high":3},{"label":"Improovy - Average Interior Painting Cost","url":"https://www.improovy.com/blog/interior-painting-cost","quote":"If you include walls, trim, and ceilings the cost per square foot is $6.75.","retrieved_at":"2026-10-03","low":6.75,"high":6.75},{"label":"Carolina Renew - Interior Painting Cost Guide","url":"https://carolinarenew.com/blog/interior-painting-cost-guide/","quote":"The average cost per sq ft for painting in Charlotte ranges from $1.50 to $4.00","retrieved_at":"2026-10-03","low":1.5,"high":4}],"default_task":"pro","default_qty":1000,"qty_label":"Wall area to paint"},{"id":"baseboard","label":"Baseboard trim (per linear ft)","unit":"linear_ft","low":6,"mid":9.5,"high":14.17,"labor_share":0.6,"default_task":"skip","qty_label":"Wall length","sources":[{"label":"Homewyse - Cost to Install Baseboard","url":"https://www.homewyse.com/services/cost_to_install_baseboard.html","quote":"$9.26 - $14.17 per linear foot","retrieved_at":"2026-09-29","low":9.26,"high":14.17},{"label":"CountBricks - Cost to Install Trim Molding","url":"https://www.countbricks.com/post/cost-to-install-trim-molding","quote":"Baseboard install: $6 – $9 per linear foot installed","retrieved_at":"2026-09-29","low":6,"high":9}]},{"id":"permit","label":"Building permit and inspections","unit":"project","low":500,"mid":1000,"high":2000,"labor_share":0,"default_task":"skip","default_qty":1,"qty_label":"Permits","diy_allowed":false,"sources":[{"label":"Chiusano Design Build - Finished Basement Cost","url":"https://chiusanodesignbuild.com/finished-basement-cost-guide/","quote":"Permit fees typically cost $500 to $2,000 depending on project scope and local jurisdiction requirements.","retrieved_at":"2026-09-29","low":500,"high":2000},{"label":"Legacy Home Remodeling - Basement Permits","url":"https://legacyhomeremodelingny.com/blog/how-much-are-permits-for-basement-remodel","quote":"Most basement remodel permits cost anywhere from $100 to $2,000","retrieved_at":"2026-09-29","low":100,"high":2000},{"label":"Elevation Basements - Basement Finishing Permit","url":"https://www.elevationbasements.com/learn/how-to-get-a-permit-to-finish-basement/","quote":"A basic basement finish permit might run $600","retrieved_at":"2026-10-03","low":600,"high":600},{"label":"Busy Builders - Basement Finishing Permit Costs","url":"https://busybuildersiowa.com/basement-finishing-permit-needs-and-how-they-affect-costs/","quote":"$1,057.81 base for the first $100,000 of project value","retrieved_at":"2026-10-03","low":1057.81,"high":1057.81}]}],"diy_allowed":true,"mode":"sum","modifiers":[{"kind":"derived","id":"q_framing","label":"Wall length","unit":"linear ft","item":"framing","shared":["length","width"],"inputs":[],"steps":[{"op":"add","by":"width"},{"op":"mul","by":2}],"basis":"geometry","rationale":"Perimeter: 2 × (length + width)."},{"kind":"derived","id":"q_insulation","label":"Wall area","unit":"sq ft","item":"insulation","shared":["length","width","height"],"inputs":[],"steps":[{"op":"add","by":"width"},{"op":"mul","by":2},{"op":"mul","by":"height"}],"basis":"geometry","rationale":"Perimeter (2 × (length + width)) × ceiling height."},{"kind":"derived","id":"q_drywall","label":"Wall area","unit":"sq ft","item":"drywall","shared":["length","width","height"],"inputs":[],"steps":[{"op":"add","by":"width"},{"op":"mul","by":2},{"op":"mul","by":"height"}],"basis":"geometry","rationale":"Perimeter (2 × (length + width)) × ceiling height."},{"kind":"derived","id":"q_paint","label":"Wall area","unit":"sq ft","item":"paint","shared":["length","width","height"],"inputs":[],"steps":[{"op":"add","by":"width"},{"op":"mul","by":2},{"op":"mul","by":"height"}],"basis":"geometry","rationale":"Perimeter (2 × (length + width)) × ceiling height."},{"kind":"derived","id":"q_electrical","label":"Floor area","unit":"sq ft","item":"electrical","shared":["length","width"],"inputs":[],"steps":[{"op":"mul","by":"width"}],"basis":"geometry","rationale":"Length × width of the basement."},{"kind":"derived","id":"q_flooring","label":"Floor area","unit":"sq ft","item":"flooring","shared":["length","width"],"inputs":[],"steps":[{"op":"mul","by":"width"}],"basis":"geometry","rationale":"Length × width of the basement."},{"kind":"derived","id":"q_ceiling","label":"Floor area","unit":"sq ft","item":"ceiling","shared":["length","width"],"inputs":[],"steps":[{"op":"mul","by":"width"}],"basis":"geometry","rationale":"Length × width of the basement."},{"kind":"select","id":"flooring_type","label":"Flooring type","applies_to":["flooring"],"default":"vinyl_lvp","options":[{"value":"vinyl_lvp","label":"Vinyl plank (LVP)","basis":"sourced","labor_mult":1,"material_mult":1,"sources":[{"label":"Angi - Luxury Vinyl Flooring Pros and Cons","url":"https://www.angi.com/articles/luxury-vinyl-flooring-pros-and-cons.htm","quote":"The cost to install luxury vinyl flooring—between $3 and $7 per square foot, including installation—is a price-savvy option for those looking to renovate a home on a budget.","retrieved_at":"2026-09-28"}]},{"value":"carpet","label":"Carpet","basis":"sourced","labor_mult":1.4,"material_mult":1.4,"sources":[{"label":"Angi - How Much Does Carpet Replacement Cost?","url":"https://www.angi.com/articles/how-much-does-carpet-cost.htm","quote":"Carpet installation costs $3 to $11 per square foot, making square footage one of the most significant factors in your total budget for the cost to install new flooring.","retrieved_at":"2026-09-28"},{"label":"Angi - Luxury Vinyl Flooring Pros and Cons","url":"https://www.angi.com/articles/luxury-vinyl-flooring-pros-and-cons.htm","quote":"The cost to install luxury vinyl flooring—between $3 and $7 per square foot, including installation—is a price-savvy option for those looking to renovate a home on a budget.","retrieved_at":"2026-09-28"}]},{"value":"tile","label":"Tile","basis":"sourced","labor_mult":2,"material_mult":2,"sources":[{"label":"Angi - How Much Does Tile Installation Cost?","url":"https://www.angi.com/articles/how-much-does-it-cost-install-tile-floor.htm","quote":"Usually, you can expect to pay between $5 and $15 per square foot for basic tile installation, including labor and materials.","retrieved_at":"2026-09-28"},{"label":"Angi - Luxury Vinyl Flooring Pros and Cons","url":"https://www.angi.com/articles/luxury-vinyl-flooring-pros-and-cons.htm","quote":"The cost to install luxury vinyl flooring—between $3 and $7 per square foot, including installation—is a price-savvy option for those looking to renovate a home on a budget.","retrieved_at":"2026-09-28"}]},{"value":"laminate","label":"Laminate","basis":"sourced_ratio","labor_mult":1.7,"material_mult":1.7,"rationale":"Laminate installed $5–$12 per sq ft ($1–$4 materials + $4–$8 installation), midpoint $8.50, divided by vinyl plank ($5).","sources":[{"label":"This Old House - Laminate Flooring Installation Cost","url":"https://www.thisoldhouse.com/flooring/laminate-flooring-installation-cost","quote":"Installing laminate flooring costs $1–$4 per square foot for materials and $4–$8 per square foot for professional installation.","retrieved_at":"2026-09-29"}]},{"value":"hardwood","label":"Hardwood","basis":"sourced_ratio","labor_mult":2.4,"material_mult":2.4,"rationale":"Hardwood installation $6–$18 per sq ft, midpoint $12, divided by vinyl plank ($5).","sources":[{"label":"This Old House - Laminate Flooring Installation Cost","url":"https://www.thisoldhouse.com/flooring/laminate-flooring-installation-cost","quote":"Hardwood Floor Installation Avg. Installation Cost: $6–$18 per square foot","retrieved_at":"2026-09-29"}]}]},{"kind":"select","id":"egress_window_type","label":"Egress window scope","applies_to":["egress_window"],"default":"window_well_only","options":[{"value":"window_well_only","label":"Add window well to existing opening","basis":"sourced","labor_mult":1,"material_mult":1,"sources":[{"label":"Angi - Window Well Installation Cost","url":"https://www.angi.com/articles/how-to-install-window-well.htm","quote":"Installing a window well costs anywhere from $500 to $1,500 or more.","retrieved_at":"2026-09-28"}]},{"value":"full_egress_kit","label":"Full egress window kit (new opening + well + window)","basis":"sourced","add":{"low":2723,"mid":4244,"high":5898,"labor_share":0.55,"per":"project"},"sources":[{"label":"Angi - Egress Window Installation Cost","url":"https://www.angi.com/articles/how-much-does-it-cost-install-egress-windows.htm","quote":"In 2026, egress window installation costs a national average of $4,244, based on data from 760 verified projects by Angi Pros. Most homeowners spend between $2,723 and $5,898 per window, with pricing driven primarily by window size, labor rates, and permit requirements.","retrieved_at":"2026-09-28"}]}]},{"kind":"select","id":"bath_type","label":"Bathroom type","applies_to":["plumbing_bathroom"],"default":"full","options":[{"value":"full","label":"Full bath (toilet, sink, shower or tub)","basis":"sourced","labor_mult":1,"material_mult":1,"sources":[{"label":"Block Renovation - Basement Bathroom","url":"https://www.blockrenovation.com/guides/how-to-build-a-bathroom-in-a-basement","quote":"Full bath Toilet, sink, shower, tub $12,000 to $30","retrieved_at":"2026-09-29"}]},{"value":"half","label":"Half bath (toilet and sink)","basis":"sourced_ratio","labor_mult":0.45,"material_mult":0.45,"rationale":"Half bath about $6,000 (midpoint of $4,000 to $8,000, and inside $4,000 to $12,000) divided by the full-bath typical $13,250.","sources":[{"label":"Block Renovation - Basement Bathroom","url":"https://www.blockrenovation.com/guides/how-to-build-a-bathroom-in-a-basement","quote":"Half bath Toilet and sink $4,000 to $12,000","retrieved_at":"2026-09-29"},{"label":"Realm - Basement Finishing Cost","url":"https://realmhome.com/blog/basement-finishing-cost-per-square-foot","quote":"A smaller half-bath is more moderate, typically running from $4,000 t","retrieved_at":"2026-09-29"}]}]},{"kind":"select","id":"ceiling_type","label":"Ceiling type","applies_to":["ceiling"],"default":"drywall","options":[{"value":"drywall","label":"Drywall","basis":"sourced","labor_mult":1,"material_mult":1,"sources":[{"label":"Country Creek Builders - Basement Ceiling Options","url":"https://www.countrycreekbuilders.com/blogs/basement-ceiling-options-in-savage-mn-drop-ceilings-vs-drywall-vs-exposed--cost-and-design-comparison","quote":"Drywall ceilings: $4-8 per sq ft installed","retrieved_at":"2026-09-29"}]},{"value":"drop","label":"Drop (suspended) ceiling","basis":"sourced_ratio","labor_mult":0.94,"material_mult":0.94,"rationale":"Drop ceiling midpoints ($2–$6 and $3–$6, average $4.25) divided by drywall ($2–$4 and $4–$8, average $4.50).","sources":[{"label":"Honey-Doers - Basement Ceiling Ideas","url":"https://www.honey-doers.com/blog/4-basement-ceiling-ideas-to-finish-your-basement/","quote":"Drop ceiling $2–$6/sq ft","retrieved_at":"2026-09-29"},{"label":"Country Creek Builders - Basement Ceiling Options","url":"https://www.countrycreekbuilders.com/blogs/basement-ceiling-options-in-savage-mn-drop-ceilings-vs-drywall-vs-exposed--cost-and-design-comparison","quote":"Drop ceilings: $3-6 per sq ft installed","retrieved_at":"2026-09-29"}]},{"value":"exposed","label":"Exposed, painted","basis":"sourced_ratio","labor_mult":0.5,"material_mult":0.5,"rationale":"Exposed ceiling midpoints ($1–$2 painted, $2–$4 installed; average $2.25) divided by drywall ($4.50).","sources":[{"label":"Honey-Doers - Basement Ceiling Ideas","url":"https://www.honey-doers.com/blog/4-basement-ceiling-ideas-to-finish-your-basement/","quote":"Painted exposed $1–$2/sq ft","retrieved_at":"2026-09-29"},{"label":"Country Creek Builders - Basement Ceiling Options","url":"https://www.countrycreekbuilders.com/blogs/basement-ceiling-options-in-savage-mn-drop-ceilings-vs-drywall-vs-exposed--cost-and-design-comparison","quote":"Exposed ceilings: $2-4 per sq ft installed","retrieved_at":"2026-09-29"}]}]},{"kind":"derived","id":"q_baseboard","label":"Wall length","unit":"linear ft","item":"baseboard","shared":["length","width"],"inputs":[],"steps":[{"op":"add","by":"width"},{"op":"mul","by":2}],"basis":"geometry","rationale":"Perimeter: 2 × (length + width)."}],"shared_inputs":[{"id":"length","label":"Basement length","unit":"ft","default":40},{"id":"width","label":"Basement width","unit":"ft","default":25},{"id":"height","label":"Ceiling height","unit":"ft","default":8}]},"cost_data_ref":{"trade":"basement","version":"v4"},"price_date":"2026-09","figures":[{"src":"/assets/img/tools/basement-finishing-cross-section.svg","alt":"Cross-section of a finished basement labeling framing, insulation, drywall, electrical, flooring, ceiling, egress window, paint and bathroom","caption":"Finishing a basement stacks several trades: framing, insulation, drywall, electrical, ceiling, flooring and paint, plus an egress window and a bathroom if you add them.","width":720,"height":360}],"title":"Finished Basement Cost Estimator","description":"Estimate the cost to finish a basement based on your room dimensions, selected tasks, and local labor rates.","seo_title":"Finished Basement Cost Estimator: Calculate Your Project","seo_description":"Estimate the cost to finish a basement. Calculate material and labor prices for framing, drywall, flooring, electrical, and more based on your local area.","seo_footprint":{"text_intro":"Finishing a basement is a major home improvement project that transforms underutilized space into a functional living area. The total expense depends heavily on the basement's dimensions, the specific tasks required—such as framing, insulation, drywall, electrical rough-in, and flooring—and whether you hire a pro or tackle some tasks yourself. This estimator helps you break down the costs for materials and labor, adjusted for your specific state or metro area, so you can plan your budget accurately.","faq":[{"question":"What is the average cost to finish a 1000 sq ft basement?","answer":"For a typical 1,000 sq ft basement (40 ft long by 25 ft wide), hiring a pro for standard framing, insulation, drywall, electrical, flooring, ceiling, and painting costs an average of $25,899. This includes both materials and labor."},{"question":"What is the most expensive part of finishing a basement?","answer":"Adding a bathroom and installing egress windows are often the most expensive individual tasks. For example, a full egress window kit installed by a pro typically costs around $8,444, while adding a half bath rough-in and fixtures averages $5,963."},{"question":"Can I save money by doing the work myself?","answer":"Yes, taking the DIY route for tasks like framing, insulation, drywall, flooring, and painting can save you the labor costs. For instance, DIY framing for 130 linear feet of wall costs about $832 in materials, saving you $1,248 in labor compared to the $2,080 pro cost. However, tasks like electrical work, egress window installation, and building permits require hiring a pro."},{"question":"How much does a building permit cost for a basement finish?","answer":"Building permits and inspections for a basement finishing project typically cost around $1,000, though this can vary by local municipality. This is a required step when hiring a pro for structural or electrical work."},{"question":"How much does basement flooring cost?","answer":"The cost depends heavily on the flooring type you choose, such as vinyl plank (LVP), carpet, tile, laminate, or hardwood. For example, having a pro install 1,000 square feet of carpet typically costs around $7,000, which breaks down to $4,200 for materials and $2,800 for labor."}],"how_to_use_steps":["Enter the basement length, width, and ceiling height in feet.","Select the scope for each task, choosing between hiring a pro, DIY (materials only), or skipping the task entirely.","Specify details like the flooring type, ceiling type, and the number of bathrooms or egress windows if applicable.","Choose your location to adjust labor rates to your local market.","Review the itemized breakdown of typical costs, materials, and labor instantly."]},"content_sections":[{"heading":"Understanding Basement Finishing Costs","paragraphs":["The cost to finish a basement varies widely based on the footprint of the space and the extent of the renovation. A complete finish usually involves framing walls, adding insulation, hanging drywall, and installing flooring and a ceiling. Each of these components carries its own material and labor price tag.","Labor rates also play a significant role in the final estimate. Because wages vary across the country, a project in a high-cost metro area will be more expensive than the national average. This estimator adjusts the labor portion of your quote based on the state or metro area you select, ensuring a more accurate reflection of local market conditions."]},{"heading":"Required vs. Optional Tasks","paragraphs":["Some tasks are essential for a standard finished basement, such as electrical rough-in and fixtures, which must be handled by a professional. Other features, like adding a bathroom or an egress window, are optional but can significantly increase the utility and safety of the space.","For example, installing a drop ceiling might cost around $4,230 for a 1,000 sq ft area, while adding a half bathroom can add approximately $5,963 to your total. You can customize your estimate by skipping tasks that do not apply to your specific project."]},{"heading":"Worked Example: 1,000 Sq Ft Basement","paragraphs":["Let's look at a standard 1,000 sq ft basement (40 ft long by 25 ft wide with an 8 ft ceiling) using national average prices. If you hire a pro for framing, insulation, drywall, electrical, vinyl plank flooring, drywall ceiling, and interior painting, the typical cost is $25,899.","This total breaks down into materials and labor. The estimate ranges from a low of $10,900 to a high of $44,460 depending on the specific finishes and site conditions. If you were to do the framing yourself, you would only pay the $832 material cost, saving $1,248 in labor."]},{"heading":"How to Interpret the Results","paragraphs":["The estimator provides a typical cost alongside a low and high estimate range. The typical cost represents the average expected price for the selected tasks using standard materials and average site conditions. The low and high estimates account for variations in material quality, unexpected site complications, and contractor pricing differences.","The breakdown separates materials from labor, which is especially useful if you plan to take on some tasks yourself. When you select the DIY option for eligible tasks, the labor cost drops to zero, and the tool calculates your DIY labor savings."]},{"heading":"Common Mistakes When Budgeting","paragraphs":["A frequent mistake homeowners make is forgetting to account for building permits and inspections. Depending on your municipality, a permit for a basement finish typically costs around $1,000 and is legally required for structural, electrical, and plumbing work.","Another common oversight is underestimating the cost of egress windows. If you plan to add a bedroom to your basement, building codes generally require an egress window for safety. A full egress window kit, which includes cutting a new opening and installing the well and window, is a significant investment that must be handled by a professional."]}],"sources":[{"label":"U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics","url":"https://www.bls.gov/oes/"},{"label":"HomeGuide","url":"https://homeguide.com/costs/cost-to-frame-a-basement"},{"label":"Bob Vila","url":"https://www.bobvila.com/articles/cost-to-frame-a-basement/"},{"label":"Norman Builders - Average Cost to Finish a Basement","url":"https://normanbuilders.com/average-cost-to-finish-a-basement/"}],"default_output":{"result":{"Typical cost":"$26,315","Low estimate":"$12,720","High estimate":"$44,460","Materials":"$11,476","Labor":"$14,839"},"footprint":"Selected tasks in the U.S. (national average): typical cost $26,315.","steps":["Wall length: 130 linear ft.","Basement wall framing, installed (per linear ft of wall): national typical price $16.00 per linear ft (range $8.00 to $24.00).","Basement wall framing, installed (per linear ft of wall) (pro): 130 linear ft x $16.00 = $2,080 before adjustments.","Basement wall framing, installed (per linear ft of wall) (pro) after the regional labor factor and adjustments: $2,080 (range $1,040 to $3,120).","Wall area: 1040 sq ft.","Basement wall/ceiling insulation (per sq ft): national typical price $2.50 per sq ft (range $1.50 to $4.50).","Basement wall/ceiling insulation (per sq ft) (pro): 1040 sq ft x $2.50 = $2,600 before adjustments.","Basement wall/ceiling insulation (per sq ft) (pro) after the regional labor factor and adjustments: $2,600 (range $1,560 to $4,680).","Wall area: 1040 sq ft.","Drywall hang + finish (per sq ft): national typical price $2.50 per sq ft (range $1.50 to $3.50).","Drywall hang + finish (per sq ft) (pro): 1040 sq ft x $2.50 = $2,600 before adjustments.","Drywall hang + finish (per sq ft) (pro) after the regional labor factor and adjustments: $2,600 (range $1,560 to $3,640).","Floor area: 1000 sq ft.","Electrical rough-in + fixtures for a basement finish (per sq ft of finished area): national typical price $5.50 per sq ft (range $2.00 to $9.00).","Electrical rough-in + fixtures for a basement finish (per sq ft of finished area) (pro): 1000 sq ft x $5.50 = $5,500 before adjustments.","Electrical rough-in + fixtures for a basement finish (per sq ft of finished area) (pro) after the regional labor factor and adjustments: $5,500 (range $2,000 to $9,000).","Floor area: 1000 sq ft.","Basement flooring, installed (per sq ft; price depends on the flooring type): national typical price $5.00 per sq ft (range $3.00 to $9.00).","Basement flooring, installed (per sq ft; price depends on the flooring type) (pro): 1000 sq ft x $5.00 = $5,000 before adjustments.","Basement flooring, installed (per sq ft; price depends on the flooring type) (pro) after the regional labor factor and adjustments: $5,000 (range $3,000 to $9,000).","Floor area: 1000 sq ft.","Basement ceiling (per sq ft): national typical price $4.50 per sq ft (range $2.00 to $8.00).","Basement ceiling (per sq ft) (pro): 1000 sq ft x $4.50 = $4,500 before adjustments.","Basement ceiling (per sq ft) (pro) after the regional labor factor and adjustments: $4,500 (range $2,000 to $8,000).","Wall area: 1040 sq ft.","Interior painting, walls + ceiling, labor and paint (per sq ft of wall area): national typical price $3.88 per sq ft (range $1.50 to $6.75).","Interior painting, walls + ceiling, labor and paint (per sq ft of wall area) (pro): 1040 sq ft x $3.88 = $4,035 before adjustments.","Interior painting, walls + ceiling, labor and paint (per sq ft of wall area) (pro) after the regional labor factor and adjustments: $4,035 (range $1,560 to $7,020).","Total for all selected tasks: $26,315 (range $12,720 to $44,460)."]},"status":"published","reviewed_at":"2026-10-05","verification_note":"datos de coste 03/10: fuentes primarias (rebuild determinista, sin forja)"}